How to eliminate edge breakage? ①Increase the height of the back beam and the stop frame, increase the tension difference of the lower warp yarn, and reduce the weft resistance; ②Lower the height of...
What is the reason for the contraction of the side yarn?If the opening angle is too early, the weft end cannot be straightened at the end of the knitting. The main nozzle and the auxiliary nozzle have...
What are the causes of double wefts? When two complete or incomplete wefts is formed and together, in a woven mouth, the tissue that breaks the plain weave fabric is called double weft, the twill weav...
Elastic bamboo woven fabric is a new type of product developed on the air jet loom based on the market demand and the characteristics of elastic fabric and bamboo woven fabric. The warp thread of this...
Spinning machine is an important part of our textile production process. It is an important premise to ensure the smooth production of production and the realization of safe production and environment...
1. Gas path 1.1 Air filter Due to compressed air contains a certain amount of dust and impurities, when work must ask after jams mesh, spray cleaning not in time will cause the main and auxiliary inje...
1. Adopt RTC (real time control) device RTC control is the real-time control of weft, which is an intelligent active control system which can optimize the air time. The RTC control device does not con...
The energy saving of the weft insertion system is mainly carried out by optimizing the weft insertion process and choosing the good energy saving performance. Optimize the weft insertion process 1. Ad...
Most of the systems in the gas supply system are powered by electricity, and the air compressor consumes more than 90% of the total power of the gas supply system. 's gas supply system efficiency acco...
English 
한국어 
português 
العربية 
tiếng việt 
ไทย 
Malay 
हिंदी 
Indonesia 
বাঙালি 
اردو 
