We provide a wide series of trolley and trucks for carrying weaving beams, heald frames, fabric roller weaving reed and etc, in both hydraulic type and electric type. All technical specification of trolley and carriers conform to industry standard. By adopting these equipments, weaving mills can greatly reduce labor cost, improve efficiency and stay ahead in market competition.
SINO-360D Hydraulic Upper & Bottom Beam & Heald Frame Lift Trolley
1. It is suitable for upper & bottom beam transporting, mounting, and dismounting on weaving machines.
2. The lifting movement and the lowering operation are performed by a mains-powered hydraulic power unit with manually operated valve.
3. Seperate steering by push/pull bar at both sides.
4. Lifting movement by hydraulic foot pedal with automatic quick lift.
5. Load capacity: weaving beam--3000kgs; heald frame-- 400kgs.
6. Lifting height: weaving beam--700mm~2100mm; heald frame: 1950mm.
7: Dimension: length--to be made as per loom reed width; width--750~1300mm; height--2400mm.
SINO-1000E Hydraulic Beam Lift Trolley
1. Designed for different width of weaving looms and tying machines.
2. Steering in traveling direction fixable on the left and right side.
3. Two Steered wheels and two guided wheels.
4. Wheels with ball bearings and thread protection caps.
5. Lifting movement by hydraulic foot pedal with
automatic quick lift.
6. Load capacity: up to 1500 Kgs.
7. Lifting height is 700mm.
8. Dimension: length--to be made as per loom reed width; width--750~1300mm; height--700mm.
SINO-1000D Hydraulic Beam & Heald Frame Lift Trolley
1. Designed for different width of weaving looms and heald frames.
2. Steering in traveling direction fixable on the left and right side.
3. Two Steered wheels and two guided wheels.
4. Wheels with ball bearings and thread protection caps.
5. Lifting movement by hydraulic foot pedal with automatic quick lift.
6. Load capacity: weaving beam 1000kgs~1500 Kgs; heald frame 400kgs.
7. Lifting height: weaving beam 700mm; heald frame 1950mm.
8. Dimension: length--to be made as per loom reed width; width--750~1300mm; height--1950mm.
SINO-1500A Hydraulic Beam & Heald Frame Lift Trolley with Bucket
1. Suitable for beam and heald frame transporting, mounting, and dismounting on weaving machines.
2. Adoption of special design bucket that can move horizontally.
3. Seperate steering by push/pull bar at both sides.
4. Steering in traveling direction fixable on the left and right side.
5. Two steered wheels and two guided wheels.
6. Load capacity: weaving beam 2000 Kgs; heald frame 400kgs.
7. Lifting height: weaving beam 700mm; heald frame 1950mm.
8. Dimension: length--to be made as per loom reed width; width--750~1300mm; height--2200mm.
SINO-200D Manual & Electric Stacking Fork Lift
1. Applicable to dismounting and lifting fabric roller.
2. Lifting by electric control, and manual removeble.
3. Lifting height: 1500mm.
4. Minimum ground height: 115mm.
SINO-200A Hydraulic Fabric Roll Lift Trolley
1. Designed for dismounting and lifting fabric roll.
2. Hydraulic vertical lifting, flexible and convenient.
3. Universal wheel, rotatable in any direction.
4. Load capacity: 500kgs.
5. Lifting height: 1100mm.
6. Dimension: length 820~1100mm; width 680mm; height 1500mm.
7. Minimum ground height 115mm.
SINO--700 Hydraulic Beam Lift Trolley
1. Designed for different width of weaving looms.
2. Can also be used in heald drafing and automatic knotting process.
3. Load capacity: 1000kgs.
4. Lifting height: 700mm.
5. Dimension: length to be made as per loom reed width; width 750~1300mm; height 700mm.
SINO-250A Empty Beam Transporting Trolley
1. Designed to transport empty weaving and warping beam.
2. Suitable for beam dia φ800~φ1250mm, beam pipe dia φ150~φ400mm
3. Two Steered wheels and two guided wheels.
4. Wheels with ball bearings and thread protection caps.
5. Lifting movement by hydraulic foot pedal with automatic quick lift.
6. Load capacity: 350kgs.
7. Dimension: length 800mm; width 550mm; height 800mm.
SINO-300A/500A Hydraulic Fabric Roll Unloading Trolley
1. Designed to unload and transport fabric roll from the weaving machine.
2. Model 300A is used for loom width below 2500mm, model 500A is used for loom width above 2500mm.
3. Four universal wheels, with 360 degree rotation.
Load capacity: model 300A 300kgs; model 500A 500kgs.
4. Maximum applicable fabric roll diameter: φ500mm.
5. Dimension: 300A L940mmxW550mmxH960mm; 500A L1140mmxW550mmxH960mm/
SINO-1000B Hydraulic Bucket Transportation Trolley
1. Designed for unloading and transporting beam & fabric roll.
2. Four-wheel synchronization, with 360 degree rotation.
3. Load capacity: 1000kgs.
4. Lifting height: 935mm.
5. Dimension: length 1100mm; width 980mm; height 820mm.
SINO-1500 Hydraulic Fork Trolley
1. Special design for transporting loom & warping beam.
2. Hydraulic lift, easy to handle and transport smoothly.
3. European standard special hydraulic pump, reliable and durable.
4. Load capacity: 1500kgs.
5. Lifting height: is 110mm.
6. Dimension: length=reed width+600mm; width 800mm~970mm; applicable flange diameter φ600~1250mm; height 460mm.
Hydraulic Tract Trolley
1. Speacial designed A frame for transportation.
2. Stable and reliable, flexible and convenient.
3. Traction capacity: 4000kgs.
4. Dimension: 800x400x1200mm(LxWxH).
We also have electric trolley and truck for the transportation, mounting and dismounting of beams, heald frames, cloth roller, reed and etc.