(1) The section of the sword shall be opened for inspection after 3 months of operation, and the clearance of the blade shall be adjusted. The adjustment method is as follows: 1. Remove the thin cop...
(I) Process parameters1. The height of the back beam: the plain grain 900mm, the twill 125mm ~ 135mm, the multi-arm 65mm ~ 88mm.2. Suspension height: flat winging 45mm, twill 32mm, multi-arm 2 5mm ~ 3...
1.Sending weft sword, weft blade edge yarn into the first of time of 70 °~ 75 .Weft blade, in general, and in time is the same as the flat, weft will be too early to send warp pinch off, form the edg...
(1) The causes of the bad winging1. Behind the machine, the spring of the pagoda spring is relaxed.2. The skewers are not good at the top and bottom of the skewers (the edge is usually the plain posit...
The weft yarn is normal, but due to the improper flight of the weft, the yarn in the yarn, the yarn in the weft and the electric fault, etc., the weft yarn will not reach the signal, resulting in the...
The main is the weft of the jet pressure or the weak weft.Reasons for the formation(1) The main nozzle is too stressed. (2) The shear blow is too strong. (3) The filling yarn is uneven and the yarn ...
1. The formation of towel fabrics Towel fabric is the textile that the towel organizes to form the hair circle. It is not only the daily necessities of people's life, but also a textile ornament....
Many people think that the texture CAD View60 is a piece of softwareThere is nothing wrong with saying thatBut strictly speakingView60 is a big modelThere are many moreConsider the convenience of cust...
We often can be used to convert some jacquard towel pattern to dobby towel loom production, if have jacquard card files, we can use dobby CAD View60 function 【according to the organization to generat...
English 
한국어 
português 
العربية 
tiếng việt 
ไทย 
Malay 
हिंदी 
Indonesia 
বাঙালি 
اردو 
