What is Drop Wire? Drop wire, also called drop pin or dropper, is an indispensable part on shuttleless loom; it indicates warp breakage and give signal to warp stop motion to stop weaving machine.
In order to adapt to the fierce market competition, our factory begin to weave some high-end and high-density fabrics, such as T/C 80/20 46×46, 130×82, 63 inches. In order to improve the quality of ...
1.IntroductionThe failure modes of reed used in four-bar weaving looms usually have four characteristics. First, from the reed width direction, damage evenly distributed on the side of reed dents. Thi...
Reeds are mainly used on looms, warping machines and sizing machines. For example, in weaving preparation, reeds are used to make warp yarns in a uniform and orderly arrangement according to a certain...
The reed of air-jet loom is also called profile reed. The structure of profile reed is consistent with the design of weft insertion system of the weaving machine. Generally, profile reed on different ...
1. IntroductionReeds are mainly used in weaving, warping and sizing machines. Shuttleless looms are widely used in the textile industry at present. Because of their high efficiency and good quality, t...
Weaving reed is one of the key equipments in textile weaving process. Its function is to push weft yarn into shedding and arrange warp yarn and weft yarn according to certain regularity and density in...
The further development of weaving system requires that the weaving reed and yarn guide, which occupy the core position in the weaving process can directly become part of the machine, rather than a pa...
Heald frames, also known as heddle frames or harness frames, are essential components of weaving looms. They are used to control the movement of the warp threads in the weaving process.
English 
한국어 
português 
العربية 
tiếng việt 
ไทย 
Malay 
हिंदी 
Indonesia 
বাঙালি 
اردو 
